Simplify3D Review

 

Screen Shot 2016-02-10 at 4.28.19 PM

Overview

Simplify3D is a very powerful 3d printing software that’s easy to use!  No need to hassle through multiple softwares to print objects, Simplify3D has a built-in slicer and file repair. It supports dual-extrusion and provides a new way of adding supports. Once you get a handle on it, I’m sure you’ll love it.

Functionality

Navigation – Simplify3D has done a good job with the navigation throughout the whole software. All of its primary features are easily accessible from it’s main interface and it also has a list of keyboard shortcuts you can use.

Control Panel – This may seem overwhelming if you’re used to MatterControl but, is pretty much an upgrade to those who have used Cura with the Pronterface plugin but, don’t be afraid. I say this because MatterControl makes it easier to locate the control panel and looks easier to use.

 

MatterControl_1_4 Cura_opt (1) S3D_opt

 

Some Cool Features

Supports – Simplify3D provides the ability to add and remove supports where you want it. They’re not the first to do it, but they made it by far one of the easiest methods out there on the market. It’s a brilliant idea with good implementation that I take advantage of and use quite a bit

Printing Profiles – Printing Profiles are preset settings you create for a printer. Simplify3D allows you to create hundreds of printing profiles that have different settings for your printer or another printer. It saves time and eliminates the hassle of changing the printing settings for different files or filaments.

  • For Example: If I was printing with NinjaFlex, I’d create a new profile and set the settings so that the printer prints at the correct temperature and speed settings specifically for NinjaFlex.

S3D_printingprofile

 

Slicing – According to Simplify3D, it’s slicer is lightning fast and is the fastest on the market. This may be a bit of an overstatement, but it’s pretty fast!

I wanted to actually see how fast it actually was so I compared it to MatterControl equipped with Slic3r. I started by slicing a calibration cube on both software tools. Both Simplify3D and MatterControl sliced it instantly.S3D

I went up to a bigger print, this Cute Little Elephant. Simplify3D showed that it’s top dog, clocking in at .88 seconds and MatterControl coming in at roughly 6 seconds.

 

Multi-Part Printing – Simplify3D allows you to print separate files at once. Some software doesn’t allow for this. This is beneficial if you’re printing pieces that interlock because it can improve printing time and print quality.

You can choose to have it print layer by layer or in sequential order. You can also adjust the support, infill, and temperature for each part if needed.

 

Overall

I’d give Simplify3D an overall score of 8/10. I’d recommend this to anyone looking for an software that’s easy, fast, and reliable. Despite the cost of $150, it supplies a lot of features allowing you to get the most out of printer.

 

You Might Also Like